Brother PT-1910 - Manual (Page 56)

48
Error Message Cause Remedy
4 LINE
LIMIT! This message appears if four lines
already exist when you press
r.
Limit the number of lines to four.
BATTERIES
WEAK! This message appears when the
installed alkaline batteries become
weak. Replace the batteries or use the
AC adaptor.
BUFFER
EMPTY! • This message appears if you hold
down c and press T, but
no text has been entered in the dis-
play.
• Enter some text before starting
this function.
• This message appears if you try to
print, but no text has been entered
in the display.
• Enter text before printing.
BUFFER
FULL! This message appears if you try to
enter a character, symbol, return or
space after the maximum number of
characters has already been entered. Delete some existing text so that
more text can be entered.
CAN’T
HERE! This message appears if the cursor is
at the end of the text when you hold
down c and press O.
Move the cursor below a
number before holding down
c and pressing O.
CHANGE
ADAPTOR! This message appears if a high-volt-
age adaptor is being used. Remove the high-voltage adap-
tor and connect the adaptor
designed exclusively for this
machine.
CUTTER
ERROR! This message appears if the tape cut-
ter is closed when you try to print or
feed the tape. Turn the P-touch off, then on
again.
INVAL.
CHRS! This message appears if the cursor is
not below a number when you hold
down c and press O.
Move the cursor below a num-
ber before holding down
c and pressing O.
ERROR MESSAGE LIST