Brother MFC-790CW - Manual (Page 131)

PhotoCapture Center
®
: Printing photos from a memory card or USB Flash memory drive
115
13
Color Enhancement (True2Life
®
)
13
You can turn on the color enhancement
(True2Life
®
) feature to print more vivid
images. Printing time will be slower.
a
Press Print Setting.
b
Press a or b to display True2Life.
c
Press True2Life.
d
Do one of the following:
„ If you want to customize the White
Balance, Sharpness or Color
Density, press On, and then go to
step e.
„ If you do not want to customize,
press Off.
Go to step h.
e
Press White Balance, Sharpness or
Color Density
.
f
Press d or c to adjust the degree of the
setting.
Press OK.
g
Do one of the following:
„ If you want to customize another
color enhancement, repeat steps e
to f.
„ If you want to change other settings,
press
to display the print setting
menu and press the setting you want
to change. (See page 112.)
h
If you do not want to change additional
settings, press Color Start to print.
Note
• White Balance
This setting adjusts the hue of the white
areas of an image. Lighting, camera
settings and other influences will effect the
appearance of white. The white areas of a
picture may be slightly pink, yellow or
some other color. By using this setting,
you can correct that effect and bring the
white areas back to pure white.
• Sharpness
This setting enhances the detail of an
image, similar to adjusting the fine focus
on a camera. If the image is not in true
focus and you cannot see the fine details
of the picture, then adjust the sharpness.
• Color Density
This setting adjusts the total amount of
color in the image. You can increase or
decrease the amount of color in an image
to improve a washed out or weak picture.