Brother MFC-790CW - Manual (Page 53)

Sending a Fax
37
5
Faxing from the scanner glass
5
You can use the scanner glass to fax pages
of a book one at a time. The document can be
up to Letter or A4 size.
You cannot send color faxes with multiple
pages.
Note
Since you can only scan one page at a
time, it is easier to use the ADF if you are
sending a multiple page document.
a
Press (Fax).
b
Load your document face down on the
scanner glass. (See Using the scanner
glass on page 21.)
c
Enter the fax number using the dial pad
or Speed Dial.
Note
You can preview a fax message before
sending it by pressing Preview. For
details, see How to preview an outgoing
fax on page 38.
d
Press Black Start or Color Start.
„ If you press Black Start, the
machine starts scanning the first
page. Go to step e.
„ If you press Color Start, the
machine starts sending the
document.
e
When the LCD asks you Next Page?,
do one of the following:
„ To send a single page, press No (or
press Black Start again).
The machine starts sending the
document.
„ To send more than one page, press
Yes
and go to step f.
f
Place the next page on the scanner
glass.
Press Black Start or Color Start.
The machine starts scanning the page.
(Repeat steps e and f for each
additional page.)
Faxing A4 size documents
from the scanner glass
5
When documents are A4 size, you need to
set Glass ScanSize to A4. If you do not,
the bottom portion of the faxes will be
missing.
a
Press (Fax).
b
Press d or c to display
Glass ScanSize
.
c
Press Glass ScanSize.
d
Press A4.
Note
You can save the setting you use most
often by setting it as default. (See Setting
your changes as the new default
on page 43.)
Color fax transmission
5
Your machine can send a color fax to
machines that support this feature.
Color faxes cannot be stored in the memory.
When you send a color fax, the machine will
send it in real time (even if Real Time TX is
set to Off).