Brother MFC-5100C - Manual (Page 56)

I N I T I A L S E T U P 4 - 5
BHL-FB-MFC-5100C-FM5.5
Setting the Beeper Volume
You can set the beeper to LOW , HIGH or OFF . The default setting is LOW .
When the beeper is set to LOW or HIGH , the MFC beeps every time you press
a key or make an error and when fax sending or receiving is finished.
1 Press Menu/Set, 1, 5, 2.
2 Press to select your option.
3 When the LCD shows the option you want, press Menu/Set.
Press Stop/Exit.
Turning On Automatic Daylight Savings Time
You can set the machine to change automatically for Daylight Savings Time. It
will reset itself forward one hour in the Spring and backward one hour in the
Fall.
1 Press Menu/Set, 1, 6.
2 Press to select ON (or OFF ),
and then press Menu/Set.
3 Press Stop/Exit.
Setting Tone/Pulse Dialing Mode (For Canada Only)
Your MFC comes set to accommodate tone dialing service
(multi-frequency). If you have pulse dialing service (rotary), you need to
change the dialing mode.
1 Press Menu/Set, 1, 7.
2 Press to select PULSE (or TONE ),
and then press Menu/Set.
3 Press Stop/Exit.
Memory Storage
In the event of a power failure, all settings in the GENERAL SETUP , SETUP
RECEIVE , SET AUTO DIAL and REMOTE FAX OPT are stored
permanently. You may have to reset the date and time.
2 . B E E P E R
or
6 . A U T O D A Y L I G H T
or
7 . T O N E / P U L S E
or