Brother MFC-5100C - Manual (Page 72)

S E T U P S E N D 6 - 7
BHL-FB-MFC-5100C-FM5.5
Checking Job Status
Check which jobs are still waiting in memory to be sent. (If no jobs are waiting,
the LCD shows
NO JOB WAITING .)
(See Canceling a Job in Memory below.)
1 Press Menu/Set, 2, 6.
2 If you have multiple jobs waiting, press to scroll through the list.
3 Press Stop/Exit.
Canceling a Job in Memory
You can cancel tasks you’ve scheduled, such as Polling Transmit, or faxes
waiting in Memory to be sent. (See
Checking Job Status above.)
1 Press Menu/Set, 2, 6.
Any waiting jobs appear on the LCD.
If no jobs are waiting, the LCD shows
NO JOB WAITING .
2 If you have more than two jobs waiting, press to select the job you want to
cancel, and then press Menu/Set.
—OR—
If you have only one job waiting, go to Step 3.
3 Press 1 to cancel—OR—Press 2 to exit without canceling.
To cancel another job, return to Step 2.
4 Press Stop/Exit.
Advanced Sending Operations
Overseas Mode
After you send a fax using this feature, the feature turns itself off.
1 Place the original face up in the ADF, or face down on the scanner glass.
2 Press Menu/Set, 2, 2, 7.
3 Press to select ON (or OFF ),
and then press Menu/Set.
4 Press 1 if you want to select additional settings. The LCD returns to the
SETUP SEND menu—OR—Press 2 if you are finished choosing settings, and
then go to Step 5.
5 Enter the fax number you’re calling.
6 Press Black Fax Start.
or
6 . R E M A I N I N G J O B S
or
7 . O V E R S E A S M O D E
or