Brother MFC-5100C - Manual (Page 96)

M A K I N G C O P I E S 10 - 9
BHL-FB-MFC-5100C-FM5.5
Changing Default Copy Settings
Press Menu/Set and 3 to change default Copy mode settings. They will remain
until you change them again by pressing Menu/Set.
By pressing a number, you can adjust the Quality, Color and Contrast copy
settings as shown in the following chart. Press to scroll through the options
for each setting, and then press Menu/Set to save your selection.
Press Stop/Exit—OR—Press to select the next setting you want to change.
Press Menu/Set and 3.
Copy Quality
1 Press Menu/Set, 3, 1.
2 Press to select the copy quality,
and press Menu/Set.
3 Press Stop/Exit.
or
QUALITY:BEST
QUALITY:FAST
1.RED
2.GREEN
3.BLUE
R: - +
1.QUALITY
2.COLOR ADJUST
3.CONTRAST - +
B: - +
G: - +
is default
QUALITY:NORMAL
1 . Q U A L I T Y
Q U A L I T Y : B E S T
Q U A L I T Y : N O R M A L
Q U A L I T Y : F A S T
or