Brother HL-8050N - Manual (Page 69)

3 - 7 PRINTER DRIVER AND SOFTWARE
Density adjustment
Increase or decrease the print density.
HRC (Windows NT ® 4.0, Windows ® 2000/XP users only)
This option allows you to change the HRC (High Resolution Control) setting on your Brother HL-8050N
series printer. HRC is a special function that offers improved print quality of characters and graphics that
conventional laser printers cannot attain with resolutions of 300 or 600 dpi.
■
Printer Default
■
Light
■
Medium
■
Dark
■
Off
TrueType Mode (Windows NT ® 4.0, Windows ® 2000/XP users only)
TrueType fonts may be sent to your printer in one of the following ways:
■
Download as TrueType
■
Download as Bit Image
■
Print as Graphics
Destination
You can select the output bin when you have installed the optional Offset Catch Tray (CT-8000) onto the
printer.
Accessories tab
When you install the optional units, you can add those options and select their settings in the
Accessories tab as follows.
1
You can manually add and remove the options for any optional unit device or RAMDISK that are
installed on the printer. Tray settings will match the installed options.
1
3
2