Brother HL-8050N - Manual (Page 90)

CONTROL PANEL 4 - 10
How to Use the Control Panel
When you operate the Menu buttons (+, -, Set, Back or Menu), remember the following basic steps:
■
If no control panel operations are performed for 30 seconds, the LCD automatically returns to
READY.
■
When you press the Set button to choose a setting, an asterisk appears at the end of the display for
a short time. After that, the display returns to the previous menu level.
■
After changing the status or a setting, pressing the Back button before you press the Set button will
cause the display to return to the previous menu level with the original settings unchanged.
■
There are two ways to input numbers. You can press + or - to scroll up or down one number at a time,
or you can hold down + or - to scroll faster. The blinking number is the one that you can change.