Brother MFC-7820N - Manual (Page 91)

Using your machine with a Macintosh ®
7 - 14
7
Scanning an image into your Macintosh ®
You can scan a whole page.
—OR—
scan a portion after pre-scanning the document.
Scanning a whole page
1
Load your document in the ADF.
Note
If your model is a flatbed type, you can also place your document on the scanner glass.
2
Adjust the following settings, if needed, in the Scanner Setup dialog box:
Resolution
Color Type
Scanning Area
Brightness
Contrast
3
Click Start.
When scanning has finished, the image will appear in your graphics application.