Brother MFC-7820N - Manual (Page 101)

Using your machine with a Macintosh ®
7 - 24
7
Using ControlCenter2.0 (For Mac OS
®
X 10.2.4 or greater)
ControlCenter2.0 is a software utility that allows you to quickly and easily access the most frequently used
applications. Using ControlCenter2.0 eliminates the need to manually launch the specific applications.
ControlCenter2.0 provides the following five categories of operations:
1
Scan directly to a file, E-mail, word processor or graphics
application of your choice.
2
Custom Scan buttons allow you to configure a button to
meet your own application requirements.
3
Access the Copy features available via your Macintosh ® .
4
Access the settings available to configure your device.
(not available for DCP-7020)
Note
The functions that can be used in ControlCenter2.0 may vary depending upon the model.
You can open the configuration window for each function by clicking the Configuration button.
Also you can select which machine will connect with ControlCenter2.0 from the Model pull-down list.
How to turn off the AutoLoad feature in ControlCenter2.0
The icon will appear on the menu bar. To open the ControlCenter2.0 window, click on the icon and select
Open.
If you do not want ControlCenter2.0 to run automatically each time the computer is started;
1
Click on the ControlCenter2.0 icon in the menu bar and select Preference.
2
The ControlCenter2.0 preference window appears, then
uncheck the Start ControlCenter on computer startup
check box.
3
Click OK to close the window.
Note
The ControlCenter2.0 application icon is in Macintosh HD/Library/Printers/Brother/Utilities/ControlCenter.