Brother PT-E550W - Manual (Page 22)

Configuring your machine for a wireless network
17
5
7
Enter the password (from 8 to 63 characters), and then press the OK or Enter key.
8
The screen returns to the text entry screen, and blinks while the connection is being established.
After 90 seconds, the indicator will change to , but your Brother machine will continue trying to connect
to the network.
9
When connected, depending on the strength of the wireless signal, the wireless connection indicator will
be one of the following symbols:
Turning the wireless function On or Off
5
To turn the wireless function on or off, press the WiFi key.
The default setting is “Off”.
1
Press the WiFi key.
2
Press the WiFi key again to turn the wireless function off.
NOTE
• If “Off” is selected in the “Network Mode” screen, the wireless function will remain off even if the WiFi
key is pressed.
• When your Brother machine is powered by batteries, the battery power will decrease quickly when the
wireless function is used. Therefore, a confirmation message is displayed when the WiFi key is pressed.
If you want to use the wireless function, press the OK or Enter key. If you connect the AC adapter while
the message is displayed, the power source will switch to the AC adapter.