Brother HL-S7000DN - Manual (Page 2)

2
Compilation and Publication
1
Under the supervision of Brother Industries, Ltd., this manual has been compiled and published,
covering the latest product descriptions and specifications.
The contents of this manual and the specifications of this product are subject to change without
notice.
Brother reserves the right to make changes without notice in the specifications and materials
contained herein and shall not be responsible for any damages (including consequential) caused
by reliance on the materials presented, including but not limited to typographical and other errors
relating to the publication.
Choosing a location
1
Put your product on a flat, level, stable surface, such as a desk, that is free of vibration and shocks
and is not slanted more than 2
. Put the product near a standard grounded AC power outlet.
Choose a location where the temperature remains between 64.4 F and 91.4F (18C and 33C)
and the humidity is between 20% to 80% (without condensation).
WARNING
DO NOT expose the product to direct sunlight, excessive heat, open flames, corrosive gasses,
moisture or dust. Doing so may create a risk of an electrical shock, electrical short or fire. It may
also damage the product and/or render it inoperable.
DO NOT place the product near heaters, air conditioners, electrical fans, refrigerators, or water.
Doing so may create the risk of a short circuit or fire, should water come into contact with the
product (including condensation caused by heating/air conditioning/ventilation equipment).