Brother HL-S7000DN User Manual

Page 6

Advertising
background image

6

DO NOT allow this product to come into contact with water. This product should not be used
around standing water including a bath tub, sink, or swimming pool, around appliances
containing water including a refrigerator, or in a wet basement.

This product should be connected to an AC power source within the range indicated on the
rating label. DO NOT connect it to a DC power source or inverter. If you are not sure what kind
of power source you have, contact a qualified electrician.

Power Cord Safety:

• This product is equipped with a 3-wire grounded plug. This plug will only fit into a grounded

power outlet. This is a safety feature. If you are unable to insert the plug into the outlet, call
your electrician to replace your obsolete outlet. DO NOT defeat the purpose of the grounded
plug.

• Use only the power cord supplied with this product.

• DO NOT allow anything to rest on the power cord.

• DO NOT place this product where people can walk on the cord.

• DO NOT place this product in a position where the cord is stretched or strain is otherwise put

on the cord. Doing so may cause the cord to become worn or frayed.

• DO NOT use the product or handle the cord if the cord has become worn or frayed.

• Unplug this product from the AC power outlet before you move the product.

• Brother strongly recommends that you DO NOT use any extension cord.

DO NOT use flammable substances, any type of spray, or an organic solvent/liquid containing
alcohol or ammonia to clean the inside or outside of the product. Doing so could cause a fire or
electrical shock. Instead, use only a dry, lint-free cloth. For instructions on how to clean the
product, see uu User’s Guide: Routine Maintenance.

For users with pacemakers

This machine generates a weak magnetic field. If you feel anything wrong with the operation of
your pacemakers when near the machine, move away from the machine and consult a doctor
immediately.

Advertising