Brother HL-S7000DN - Manual (Page 9)

9
When placing or repositioning your Brother machine on the optional stabilizer, make sure that
all four stabilizer support legs are adjusted and rest firmly on the floor. Not adjusting the optional
stabilizer support legs may cause the machine to move or fall over, resulting in injury to you.
Be careful not to trip on the legs of the optional stabilizer unit. Do not stand on the optional
stabilizer unit. The printer and the optional stabilizer unit may move and cause you to fall.
DO NOT touch the hazardous moving parts.
Keep fingers and other body parts away.
DO NOT push the optional output tray from the side after it is installed. The optional output tray
may fall and cause injury to you.