Danger, Warning, Important safety instructions – Brother LX2375 User Manual

Page 2

Advertising
background image

1

IMPORTANT SAFETY INSTRUCTIONS

When using the sewing machine, basic safety precautions should always be followed,

including the following:

“Read all instructions before using.”

DANGER

– To reduce the risk of electric shock:

1. The sewing machine should never be left unattended when plugged in.

Always unplug this sewing machine from the electrical outlet immediately
after using and before cleaning.

2. Always unplug before changing the light bulb. Replace bulb with same type

rated 15 watts.

WARNING

– To reduce the risk of burns, fire, electric

shock, or injury to persons:
1. Do not allow this machine to be used as a toy. Close attention is necessary

when the sewing machine is used by or near children.

2. Use this sewing machine only for its intended use as described in this manual. Use

only accessories recommended by the manufacturer as contained in this manual.

3. Never operate this sewing machine if it has a damaged cord or plug, if it is not

working properly, if it has been dropped or damaged, or dropped into water.
Return the sewing machine to the nearest authorized dealer or service center
for examination, repair, electrical or mechanical adjustment.

4. Never operate the sewing machine with any of the air openings blocked. Keep

the ventilation openings of the sewing machine and foot controller free from
the accumulation of lint, dust and loose cloth.

5. Never drop or insert any object into any openings.
6. Do not use this machine outdoors.
7. Do not operate this machine where aerosol (spray) products are being used or

where oxygen is being administered.

8. To disconnect, turn the main switch to the symbol “O” position which

represents off, then remove plug from outlet.

9. Do not unplug by pulling on the cord. To unplug, grasp the plug and pull, not the cord.
10.Keep fingers away from all moving parts. Special care is required around the

sewing machine needle.

11.Always use the proper needle plate. The wrong plate can cause the needle to break.
12.Do not use a bent needle.
13.Do not pull or push the fabric while stitching. It may deflect the needle

causing it to break.

14.Switch the sewing machine to the off, symbol “O” position when making any

adjustments in the needle area, such as threading the needle, changing the
needle, threading the bobbin, or changing the presser foot.

15.Always unplug the sewing machine from the electrical outlet when removing

covers, lubricating, or when making any other user service adjustments
mentioned in this instruction manual.

16.This sewing machine is not intended for use by young children or impaired

persons without supervision.

Advertising