For wireless network users (mac os, Installing the printer driver, For wireless network users – Brother HL-5280DW User Manual

Page 39: Macintosh, Mac os, Important

Advertising
background image

Installing the Printer Driver

37

Mac

in

to

s

h

®

W

irel

ess

Network

Macintosh

®

7

For wireless network users (

Mac OS

®

X 10.2.4 or greater users)

Connect your wireless printer and wireless network together: install the

printer driver in infrastructure mode

First you must configure the wireless network settings of your printer to communicate with your network access
point (router). After the printer is configured to communicate with your access point (router) computers on your
network will have access to the printer. To use the printer from these computers, you will need to install the printer
driver. The following steps will guide you through the configuration and installation process.

To achieve optimum results with normal every day document printing, place the Brother printer as close to the
network access point (router) as possible with minimal obstructions. Large objects and walls between the two
devices as well as interference from other electronic devices can affect the data transfer speed of your documents.

Due to these factors, wireless may not be the best method of connection for all types of documents and
applications. If you are printing large files, such as photos or multi-page documents with mixed text and large
graphics, you may want to consider choosing wired Ethernet for a faster data transfer, or USB for the fastest
throughput speed.

Important

The following instructions will install your Brother printer in a wireless network environment in
infrastructure mode, using a wireless router or access point that uses DHCP to assign IP addresses. If
you want to setup your printer in any other wireless environment you can find instructions in the
Network User’s Guide on the CD-ROM.

Note

• If you are going to connect the printer to your network, we recommend that you contact your system

administrator prior to installation.

• Before installation, if you are using Personal Firewall software, disable it. Once you are sure that you can print,

restart your Personal Firewall software.

Infrastructure Mode

Advertising