Brother HL-5280DW - Manual (Page 46)

Installing the Printer Driver
44
STEP 2
Mac
in
to
s
h
®
W
irel
ess
Network
Macintosh
®
8
You need to temporarily change your
computer’s wireless settings. Please follow the
on-screen instructions. Please make sure you
take notes on all the settings such as SSID or
channel of your computer. You will need them
to return your computer back to its original
wireless settings. Click Next.
9
To communicate with the un-configured
wireless printer, temporarily change the
wireless settings on your computer to match
printer’s default settings shown on this screen.
Check Checked and confirmed, and then
click Next.
Note
• See the User’s Guide of your Network Interface or
your computer for how to change the wireless
settings.
• You can temporarily change the wireless settings
on your computer, following the steps below:
1 Click the AirPort status icon and select.
Open Internet Connect....
2 Click the Network tab to see the available
wireless devices. You can see the Brother
wireless print server in the Network option.
Select SETUP.
3 Your wireless network is connected
successfully.
Item Record the current
wireless computer
settings
Communication mode
(Infrastructure / Ad-hoc)
Channel
(1-14)
Network name
(SSID / ESSID)
Authentication method
(Open system / Shared key
/ Other)
Encryption
(None / WEP / Other)
Encryption key