Brother HL-5280DW - Manual (Page 63)

4. Control Panel
55
Using the control panel LCD menu
When you use the Menu buttons (+, -, Set or Back), remember the following basic steps:
„ If no control panel operations are performed for 30 seconds, the LCD automatically returns to READY.
„ When you press Set to choose a setting, an asterisk appears at the end of the LCD for a short time. After
that, the LCD returns to the previous menu level.
„ After changing the status or a setting, pressing Back before you press Set will cause the LCD to return to
the previous menu level with the original settings unchanged.
„ There are two ways to input numbers. You can press the + or - button to scroll up or down one number at
a time, or you can hold down the + or - button to scroll faster. The blinking number is the one that you can
change.
For example: If you feed paper from the MP tray as a priority, change the MP FIRST setting
to ON as follows.
The default setting is OFF. Turn this setting ON if you want to.
a
Press any of the Menu buttons (+, -, Set or Back) to take the printer offline.
READY
h
INFORMATION
b Press the + or - button to choose PAPER.
PAPER
c
Press Set to move to the next menu level.
SOURCE
d
Press the + or - button to choose MP FIRST.
MP FIRST
e Press Set.
=OFF *
f Press the + button to choose ON.
=ON
g Press Set.
An asterisk * briefly appears at the end of the LCD.
The current setting is shown by an *.
=ON *