Brother HL-5280DW - Manual (Page 78)

5. Options
70
DIMM
The printer has 32 MB of standard memory and one slot for optional memory expansion. You can expand the
memory up to 544 MB by installing dual in-line memory modules (DIMMs).
DIMM types
You can install the following DIMMs:
„ 128 MB Buffalo Technology VN133-D128 / VN133-X128
„ 256 MB Buffalo Technology VN133-D256
„ 512 MB Buffalo Technology VN133-D512
„ 64 MB TechWorks 12165-0004
„ 128 MB TechWorks 12462-0001
„ 256 MB TechWorks 12485-0001
„ 512 MB TechWorks 12475-0001
Note
• For more information, visit the Buffalo Techonology site at http://www.buffalotech.com.
• For more information, visit the Techworks web site at http://www.techworks.com.
In general, the DIMM must have the following specifications:
Type: 144 pin and 64 bit output
CAS latency: 2
Clock frequency: 100 MHz or more
Capacity: 64, 128, 256 or 512 MB
Height: 31.75 mm (1.25 in.)
Dram Type: SDRAM 2 Bank
SDRAM can be used.
Note
• There might be some DIMMs that will not work with the printer.
• For more information, call the dealer you bought the printer from or Brother Customer Service.