Conventions – ADC HiGain HMS-318 User Manual
Page 10
x
C
ONVENTIONS
The following style conventions and terminology are used throughout this guide.
Appendix A: Signal and Pin Assignments
Lists Tip and Ring signal and pin assignments to the HMS-318
List 3 shelf, including:
• P1-DSX-1 Receive or xDSL B IN, Tip and Ring
• P2-DSX-1 Transmit or xDSL A IN, Tip and Ring
• P3-HDSL Span 1 or xDSL A OUT, Tip and Ring
• P4-HDSL Span 2 or xDSL B OUT, Tip and Ring
Appendix B: Standard PIC Color Code
Lists the standard PIC color codes with the Pair Number cross-
referenced with the colors of the Tip and Ring wires used by the
installer.
Appendix C: Circuit Card Preventive
Measures
Describes the preventive measures that should be observed
when using the shelf, including:
• Handling and storing of circuit cards
• Installing/replacing circuit cards sensitive to static electricity
Provides power requirements, physical dimensions,
recommended operational and storage environments, and
accessories for the HMS-318 List 3 shelf.
Provides information on how to contact the ADC Technical
Support group.
Defines abbreviations and acronyms used in this document and
that relate to the HMS-318 List 3 shelf.
Element
Meaning
Bold font
Text that you must input exactly as shown (e.g., type 1 for card 1), menu buttons
(e.g., ACCEPT SHELF OPTIONS) or menu screen options (e.g., ALARMS screen) that
you must select
Italic font
Variables that you must determine before inputting the correct value (e.g., Password )
Monospace font
References to screen prompts (e.g., Invalid Password...Try Again:.)
Reader Alert
Meaning
Alerts you to supplementary information
!
IMPORTANT
Alerts you to supplementary information that is essential to the completion of a task
ATTENTION
Alerts you to possible equipment damage from electrostatic discharge
Chapter
Description