Axis Communications 2120 User Manual
Page 13
AXIS 2120
User’s Manual
Installing Your Camera on a Network
13
Notes:
•In Windows you can find out the IP address of your workstation by running
winipcfg
(Win
95/98) or
ipconfig
(Win NT/2000) from the command line.
•See also Alternative Methods of Assigning the IP Address, on page 15.
❸
Connect an Ethernet cable
Connect an Ethernet cable to your AXIS 2120 and
attach it to the network.
Network Indicator
❻
Exit ping and check the installation.
The installation is now complete, and you are
now ready to access the AXIS 2120 from your
Web browser, as described in the next section...
❹
Attach the external Power Supply
Attach the external Power Supply to the unit
and connect it to your local power supply.
❺
Wait for ARP reply and check Network
indicator
Approximately 10-15 seconds after connecting the power
supply, the message ‘
Reply from 172.21.1.200...
’ -
or similar, is returned in the window. Ensure that the
Power Indicator is permanently lit and that the Network
Indicator flashes intermittently.
Power Indicator