Axis Communications 2120 - Manual (Page 63)

AXIS 2120 User’s Manual Appendix E - Custom Web Pages 63
3. Log on as root with the root password
pass
.
4. Change to the correct directory within the AXIS 2120 by entering the following command:
5. For binary storage of the files (not absolutely necessary, although good practice), type bin
6. Upload your html files by entering:
7. Start your browser and view the Web pages you have now uploaded, by entering the following
URL in the location/Address field:
Example:
The images are now updated in your browser.
Note: You can change the html files as and when you like, but remember that the available flash mem-
ory is limited.
8. Enter
bye
in the command window to exit the ftp program.
Creating a New Home Page
Having created and stored your new custom Web pages in product memory, you then proceed to
assign one of these pages as your default Home page in the AXIS 2120, as described below:
Caution!
1. Start a new ftp session to the AXIS 2120, by entering:
2. type bin
3. Navigate your way to the appropriate directory, entering:
cd /etc/httpd/html
put <filename.html>
http://<camera ip address>/local/<filename.html>
http://172.21.1.200/local/index.html
Adding a new Web page to your AXIS 2120 is not something that should be undertaken lightly.
Remember: Axis does not support the personalization of product Web pages and strongly recom-
mends that inexperienced users DO NOT perform such modifications.
ftp <camera ip address >
cd /etc/httpd/conf/