To utilize images imported to the computer – Canon PIXMA MX395 User Manual
Page 11
To Utilize Images Imported to the Computer
Depending on the application to be started upon connecting a digital camera or inserting a picture CD,
images may be saved in a special format and thus may not be utilized in other applications. In that case, see
this page and change to an application that saves images to a standard folder.
Important
• My Image Garden cannot utilize images in the iPhoto library.
Checking/Changing the Application to Start upon Digital Camera
Connection
You can check/change the application to be started upon connecting a digital camera or inserting an SD
card by following the steps below. To utilize images imported to the computer in My Image Garden, it is
recommended that you start Image Capture and save the images.
1. From the Go menu of Finder, select Applications, then double-click the iPhoto icon.
iPhoto starts.
Note
• If the message "Do you want to use iPhoto when you connect your digital camera?" appears,
click No.
2. Select Preferences... from the iPhoto menu.
3. Check Connecting camera opens on the General tab.
When an application other than
Image Capture is specified:
Specify Image Capture. Thereafter, Image Capture will start upon connecting a digital camera to or
inserting an SD card into your computer. You can utilize various functions by setting My Image Garden
to analyze the folder in which images imported with Image Capture are saved. Refer to the following
for details on the setting procedure.
Saving Digital Camera Images to a Folder Subject to Image Analysis
When
Image Capture is specified:
The images on the digital camera or SD card are saved to the folder specified for Import To in the
Image Capture screen. You can utilize various functions by adding the folder in which images imported
with Image Capture are saved to Perform Image Analysis in the Following Folder(s) in the
Preferences dialog of My Image Garden.
Checking/Changing the Application to Start upon Picture CD Insertion
You can check/change the application to be started upon inserting a picture CD by following the steps
below.
11