Merge frames view – Canon PIXMA MX395 User Manual

Page 258

Advertising
background image

Merge Frames View

You can merge still images captured from a video in the order of the time code to create an image depicting
the flow of a moving subject.

Select the images you want to merge in the Video Frame Capture view, then click Merge Frames to switch
to the Merge Frames view.

Important

• You can merge between 5 and 30 still images.
• Still images corrected in the Correct view cannot be used. The original uncorrected still images will be

used.

Note

• It is recommended that you use still images captured from a video recorded with a steady camera (fixed

to a tripod, etc.) without zooming or adjusting focus while recording.

• Some portions of subjects may appear transparent if frames in which moving subjects overlap are

selected.

• Frames may not merge properly in the following cases.

• When using a video recorded in a place where the background is moving
• When frames in which moving subjects/shadows overlap are selected
• When using a video recorded in a place where moving subjects and the background have similar

colors and shapes

• When using a video in which the brightness or lighting changed while recording
• When using a video recorded using special functions such as miniature effect

(1) Selected Images Area
(2) Preview Area
(3) Operation Buttons
(4) Display Size Setting Bar

258

Advertising