Canon PIXMA MX395 - Manual (Page 176)

Note
• The effect level can be changed by moving the slider displayed below Blur Background.
• When the cursor is moved over the Preview area, the shape of the cursor changes to (Pen).
5. Specify the focus area (area that will not be blurred) with a line by clicking along its outline.
Note
• You can select whether to detect the outline automatically, by clicking (Detect the Outline and
Select the Area) on the Toolbar. When the "Detect the outline and select the area" mode is
selected, the outline near the cursor is automatically detected, enabling you to specify the area
along the outline.
Specify the area while pressing the shift key to temporarily cancel the "Detect the outline and
select the area" mode.
• When the "Detect the outline and select the area" mode is canceled, a clicked point and the next
clicked point will be connected with a straight line.
• Press the delete key to undo the specified points one at a time.
176