Canon EF 200mm f2.8L II USM - Manual (Page 8)

ENG-7
• When compensating for the
focusing difference, set the
focus mode switch to MF and
use the focusing ring.
• The position of the infrared
mark is based on a
wavelength of 800 nm. The
proper position of the infrared
mark may differ slightly
depending on the infrared film
used. Taking several shots
and shifting the distance
setting to a slightly different
position each time is
recommended.
• Also read the instructions that
came with the infrared film.
• Infrared film cannot be used
with certain EOS camera
models. Read the camera's
instructions.
The EF 300mm f/4L USM lens and EF 400mm f/5.6L USM lens
come with a tripod mount. When the camera is attached with either
lens and it is to be mounted on a tripod, use the lens' tripod mount
instead of the camera body's tripod socket.
If using the EF 200mm f/2.8L II USM lens with an extender or
extension tube, use a ring-type tripod mount A (B) (sold separately)
to mount it on a tripod.
Using the lens' tripod mount gives better balance and stability on a
tripod. By loosening the tripod mount's lock nut, the camera can be
revolved for vertical or horizontal picture conposition.
Be sure to tighten the tripod mount before removing the camera
when using a tripod.
9. Tripod Mount
(for EF 200mm f/2.8L II USM, EF 300mm f/4L USM,
and EF 400mm f/5.6L USM lenses)
10ML_01_EF135-400_ENG 06.4.17 4:12 PM ページ ENG-7