Canon EOS 1200D - Manual (Page 39)

38
1
2
3
4
Introduction
Contents at
a Glance
Downloading
Images
Camera
Settings
Remote
Shooting
Reference
Preferences
Index
7 Click the [ ] button to shoot.
 The shot image is transferred to your computer and displayed in
the [Quick Preview] window. Then, DPP starts up automatically.
 You can quickly review the shot image in the [Quick Preview]
window displayed before DPP starts up. You can also resize the
[Quick Preview] window.
 You can show/hide the [Quick Preview] window by clicking the
[Other Functions] button in the capture widow and selecting
[Quick Preview] from the menu that appears.
 You cannot perform RAW processing. If you connect the camera
to your computer during in-camera RAW processing, the camera
and computer will connect after the processing is finished.
 Options for Basic Zone modes cannot be set to cameras
equipped with Basic Zone modes on their Mode Dials.
 On
, you cannot set the [Creative Auto] function.
 You can also shoot using the <space> bar on the keyboard.
 You cannot operate the camera when the [Remote Live View
window] is displayed. Pressing the Live View shooting button (the
camera’s <SET> button on the
) will also display the
Live View image on the camera’s LCD monitor, allowing you to
view the image while operating the camera.
6D 70D 60D REBELT5i 700D REBELSL1 100D
REBELT4i 650D REBELT3i 600D REBELT5 1200D REBELT3
1100D
1D Mk IV 1Ds Mk III 1D Mk III
40D REBELXSi 450D REBELXS 1000D
 You can shoot by operating the capture window, even if the
[Remote Live View window] is not displayed.
 To perform exposure simulation (p.46) with [Remote Live View
window] or enable display of histograms (p.105) , set your
camera’s Custom Function [Live View exposure simulation] to
[Enable]. On
, set [Exposure
simulation] in the menu to [Enable].
 On
,
you can also use mirror lockup with remote shooting. (You cannot
take test shots after setting mirror lockup.)
 On
, self-timer shooting is possible.
 With , mirror lockup and Silent single shooting
cannot be performed in remote shooting.
 The [Test Shooting] window appears when you click the [Test
shooting] button.
During flash shooting, you can take a test shot under the same
conditions as an actual shot, and adjust the white balance based
on the shot test image
(p.47) .
 You can save shot images to both your computer and a memory
card by checkmarking [Save also on the camera’s memory card]
in preferences ([Remote Shooting] tab sheet)
(p.85) .
 You can change the software that starts up automatically when
remotely shot images are transferred to your computer from DPP
to ImageBrowser EX or other software in preferences ([Linked
Software] tab sheet)
(p.86) .
 For a list of the [Remote Live View window] functions, see p.105 .
 For a list of the [Zoom View] Window functions, see p.107 .
1D X 1D C 1D Mk IV 5D Mk III 5D Mk II
6D 7D 70D 60D 50D
1D X 1D C 1D Mk IV 5D Mk III 5D Mk II 6D
7D 70D 60D 50D REBELT5i 700D REBELSL1
100D REBELT4i 650D REBELT3i 600D REBELT2i 550D
1D X 1D C 5D Mk III 6D 70D REBELT5i 700D
REBELSL1 100D REBELT4i 650D
1Ds Mk III 1D Mk III
COP
Y