Cop y – Canon Wireless File Transmitter WFT-E7A User Manual
Page 110
110
Handling Error Messages
Are you following the correct procedure to establish the connection with slave
cameras?
X
Operate slave cameras by following the correct instructions (p.70, 71).
Are the slave cameras too far from the master camera?
X
Bring the slave cameras closer to the master camera.
Are you following the correct procedure to establish the connection with master
camera?
X
Operate the master camera by following the correct instructions (p.70, 71).
Is the master camera too far from the slave cameras?
X
Bring the master camera closer to the slave cameras.
Are you following the correct procedure to establish a connection between the
master and slave cameras?
X
Operate the master and slave cameras by following the correct instructions (p.91, 92).
Are the master and slave cameras too far apart?
X
Bring the master and slave cameras closer together.
Is the LAN cable securely connected?
X
Reconnect the LAN cable between the camera and server. Because the cable may be
severed, try using another cable to connect the devices.
Is the hub or router on?
X
Turn on the hub or router.
Is the server on?
X
Turn the server on. The server may have been turned off because of an energy-saving
mode.
An error other than error number 11 to 81 has occurred.
X
Turn the camera’s power switch off and on.
71: Cannot connect to slave camera
72: Cannot connect to master camera
73: Could not synchronize the time
81: Wired LAN connection lost
91: Other error
COP
Y