Canon Wireless File Transmitter WFT-E7A - Manual (Page 92)

92
Synchronizing the Time
6 Set up the master camera.
After configuring the master camera settings
following steps 1–5 on the preceding page, select
[Master].
X When the next screen is displayed, the master
camera is ready. Go to step 7 to set up the slave
cameras.
7 Set up the slave cameras.
After configuring the slave camera settings
following steps 1–5 on the preceding page, select
[Slave].
X Select [OK] on the next screen displayed, shown
below.
To set the time on multiple slave cameras, follow
these steps on each slave camera. The master
camera screen shown in step 8 indicates the
number of slave cameras.
8 On the master camera, select [OK].
Check the number of slave cameras, and then
select [OK].
X The time on slave cameras is now synchronized to
the master camera time.
Select [OK] to return to the [Network settings]
screen.
COP
Y