Canon PowerShot A4000 IS - Manual (Page 139)

Using Optional Accessories
139
Insert the coupler.
z Insert the coupler facing the direction shown,
just as you would a battery (following step 2
on p. 18).
z Make sure the coupler cable passes through
the port.
Close the cover.
z Lower the cover ( ) and hold it down as you
slide it until it clicks into the closed position
(
).
Connect the power cord.
z Insert the adapter plug into the end of the
coupler cable.
z Insert one end of the power cord into the
compact power adapter, and then plug the
other end into a power outlet.
z Turn the camera on and use it as desired.
z When finished, turn the camera off and
unplug the power cord from the outlet.
Terminals
• Do not disconnect the adapter or unplug the power cord while the
camera is still on. This may erase your shots or damage the camera.
• Do not attach the adapter or adapter cord to other objects. Doing so
could result in malfunction or damage to the product.
COP
Y