Canon PowerShot ELPH 140 IS - Manual (Page 20)

20
ç Contents ç Chapter Contents
Charging the Battery Pack
Before use, charge the battery pack with the included charger. Be
sure to charge the battery pack initially, because the camera is not
sold with the battery pack charged.
1
Insert the battery pack.
z z
After aligning the
 marks on
the battery pack and charger,
insert the battery pack by
pushing it in ( ) and down ( ).
2
Charge the battery pack.
z z
CB-2LF: Flip out the plug
( ) and plug the charger into a
power outlet ( ).
z z
CB-2LFE: Plug the power cord
into the charger, then plug the
other end into a power outlet.
z z
The charging lamp turns
orange, and charging begins.
z z When charging is finished, the
lamp turns green.
3
Remove the battery
pack.
z z
After unplugging the battery
charger, remove the battery
pack by pushing it in ( ) and
up ( ).
CB-2LF
CB-2LFE