Still images – Canon PowerShot ELPH 140 IS User Manual
Page 50
50
ç Contents
ç Chapter Contents
Still Images
•
A blinking [
] icon warns that images are more likely to be
blurred by camera shake. In this case, mount the camera
on a tripod or take other measures to keep it still.
•
If your shots are dark despite the flash firing, move closer
to the subject. For details on the flash range, see “Flash
Range” (
•
The subject may be too close if the camera only beeps
once when you press the shutter button halfway. For
details on the focusing range (shooting range), see
“Shooting Range” (
•
To reduce red-eye and to assist in focusing, the lamp may
be activated when shooting in low-light conditions.
•
A blinking [
h] icon displayed when you attempt to shoot
indicates that shooting is not possible until the flash has
finished recharging. Shooting can resume as soon as the
flash is ready, so either press the shutter button all the way
down and wait, or release it and press it again.
•
Although you can shoot again before the shooting screen
is displayed, your previous shot may determine the focus,
brightness, and colors used.
•
You can change how long images are displayed after shots
(