Cop y – Canon VB-C60 User Manual

Page 121

Advertising
background image

121

4

Register

Camera

Ser

ver

and

Set

Recor

ding

Sc
hedule

Change Camera Server Settings

Preset

Presets should be set on the Camera Server in advance. You cannot set them with

VK-64/VK-16.

If the recording settings using a preset are used on the Camera Server, the preset

position will override camera positions set by VK-64/VK-16, including those in recording
schedules and Camera Server position. The camera control will be lost when starting to
control the camera at the Camera Server.

If predefined presets are not shown in the Preset drop-down menu even though they
have been defined on the Camera Server, click Camera Control to display the Camera
Control Panel, obtain camera control, then configure the settings again.

Restrict Service Time

If a Camera Server has been configured with Restrict Service Time enabled,

VK-64/VK-16 will be able to record from the Camera Server during restricted times.

External Device

Specify the name of the external device, such as sensor name. You cannot configure it

with VK-64/VK-16.

If the external device is not set on the Camera Server, VK-64/VK-16 cannot configure it.

Sensor Input, Recording to Camera Memory

Camera Servers have certain features to capture image into its memory based on

sensor input or schedule. If settings are enabled on the Camera Server, those settings
take precedence.

COP

Y

Advertising
This manual is related to the following products: