Canon VB-C60 - Manual (Page 265)

265
9
Tr
oub
leshooting
The audio transmission function of
the camera is disabled.
You attempted to apply video
recording stream settings to high rate
JPEG video or MPEG-4 video.
The data volume of MPEG-4 video
becomes several times bigger if the
video contains a lot of motion of
subjects. You need attention when
using Preset Tour together with
MPEG-4 recording, as a whole image
moves during Preset Tour.
A non-Administrator user attempted
to start up the Motion Detection
Setting dialog.
The configured settings exceed the
endurance limit of 100,000 pans and
tilts (300,000 for the VB-C60) within
one year on the VB-C50i or VB-
C300.
Messages List
Add Recording
Schedule
Motion Detection
Dialog
Preset Tour
Settings
The audio transmission function of
the camera is not effective. Please
confirm the setting of the camera.
A setup of the stream for recording
is applied only to the JPEG
recording not more than maximum
frame rate 10fps.
it is applied to neither JPEG
recording of 10 or more fps nor
MPEG-4 recording.
MPEG-4 recording with Preset Tour
could consume disk space rapidly.
Do you wish to continue?
The motion detection setting tool
cannot be started because the user
of the camera is not a manager.
Attention:
The current Preset Tour settings
might require you to repair the
Pan/Tilt machine soon.
Please note that the repair of
consumable mechanical parts such
as the Pan/Tilt machine may not be
covered by the guarantee.
Recommended Preset Tour settings
to reduce the machine load:
- Change the Preset Tour duration
within {hh} : {nn} at the [Start
Time] and [End Time] setting.
- Adjust the Preset Tour
configuration so that the total
amount of camera movement
(angle/time) becomes small.
- Set the pause time to the preset
position longer than the Pause
(sec) setting.
Click the [Cancel] button to return to
the setting screen.
Messages Cause
Viewer Warning Messages
COP
Y