Canon imageCLASS MF4880dw - Manual (Page 15)

15
Troubleshooting
Could not connect.
Check PSK settings.
Close
Action
• Enter the correct network key and repeat the setup.
If the message still appears:
Check network connection referring to “Cannot Connect to the Network” (P.18).
Shared Key auth.
failed. Check WEP
settings.
Close
Action
• Enter the correct network key and repeat the setup.
If the message still appears:
Change the WEP encryption on the router to “Shared Key,” or change the WEP
authentication method on the machine to <Open System>.
Confi gure all the settings manually to change the setting to <Open System>.
(See the e-Manual)
Open authentication
failed. Check WEP
settings.
Close
Action
• Change the WEP authentication method on the machine to <Shared Key>.
Confi gure all the settings manually to change the setting to <Shared Key>.
(See the e-Manual)
If the message still appears:
Change the MAC address for the machine and the computer you are using to the
allowed settings.
Prepare for Wireless LAN Connection
1
Setting the Wireless LAN
2
Installing the Software
3
Troubleshooting
4