Canon Color imageCLASS MF8280Cw - Manual (Page 15)

15
Troubleshooting
Action
• Enter the correct network key and repeat the setup.
If the message still appears:
Check network connection referring to “Cannot Connect to the Network” (P.18).
Action
• Enter the correct network key and repeat the setup.
If the message still appears:
Check the WEP authentication settings of the wireless router.
Action
• Change the WEP authentication method on the machine to <Shared Key>.
Configure all the settings manually to change the setting to <Shared Key>.
(See the e-Manual)
If the message still appears:
When the MAC address filter is set at the wireless router, set the MAC address of
the machine to the wireless router. To check the MAC address of the machine, see
the e-Manual.
Prepare for Wireless LAN Connection
1
Setting the Wireless LAN
2
Installing the Software
3
Troubleshooting
4