Canon PowerShot SX600 HS - Manual (Page 62)

62
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode / Hybrid
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode / Hybrid
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
• In [ Z] mode, mount the camera on a tripod or take other measures
to keep it still and prevent camera shake. Additionally, you should
set [IS Mode] to [Off] when using a tripod or other means to secure
the camera ( = 63 ).
• In [ Z] mode, even after the flash fires, ensure that the main subject
does not move until the shutter sound is finished playing.
[!] Off
For shooting without the flash.
• If a blinking [ ] icon is displayed when you press the shutter button
halfway in camera-shake inducing, low-light conditions, mount the
camera on a tripod or take other measures to keep it still.
Still Images
Shooting with the FE Lock
Just as with the AE lock ( = 53 ), you can lock the exposure for the flash
shots.
1 Raise the flash and set it to [h]
( = 61 ).
2 Lock the flash exposure.
z z Aim the camera at the subject to shoot
with the exposure locked. With the
shutter button pressed halfway, press the
< o> button.
z z The flash fires, and when [ (] is
displayed, the flash output level is
retained.
z z To unlock FE, release the shutter button
and press the < o> button again. In this
case, [ (] is no longer displayed.
3 Compose the shot and shoot.
• FE: Flash Exposure