Canon PowerShot SX600 HS - Manual (Page 74)

74
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode / Hybrid
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode / Hybrid
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
Using the Menu
1 Access the setting screen.
z z Press the < n> button and choose
[Protect] on the [ 1] tab ( = 21 ).
2 Choose a selection method.
z z Choose a menu item and an option as
desired ( = 21 ).
z z To return to the menu screen, press the
< n> button.
Choosing Images Individually
1 Choose [Select].
z z Following step 2 in “Using the Menu”
( = 74 ), choose [Select] and press the
< m> button.
2 Choose an image.
z z Press the < q><r> buttons to choose an
image, and then press the < m> button.
[ ] is displayed.
z z To cancel selection, press the < m>
button again. [ ] is no longer displayed.
z z Repeat this process to specify other
images.
3 Protect the image.
z z Press the < n> button.
A confirmation message is displayed.
z z Press the < q><r> buttons to choose
[OK], and then press the < m> button.
• Images will not be protected if you switch to Shooting mode or turn
the camera off before finishing the setup process in step 3.
Selecting a Range
1 Choose [Select Range].
z z Following step 2 in “Using the Menu”
( = 74 ), choose [Select Range] and
press the < m> button.
2 Choose a starting image.
z z Press the < m> button.
z z Press the < q><r> buttons to choose an
image, and then press the < m> button.