Canon PowerShot ELPH 150 IS - Manual (Page 183)

183
ç Contents ç Chapter Contents
Shots are out of focus.
•
Press the shutter button halfway to focus on subjects before pressing it all
the way down to shoot (
=
38 ).
•
Make sure subjects are within focusing range (
=
212 ).
•
Set [Lamp Setting] to [On] (
=
68 ).
• Confirm that unneeded functions such as macro are deactivated.
•
Try shooting with focus lock or AF lock (
=
97 , 100 ).
No AF frames are displayed and the camera does not focus
when the shutter button is pressed halfway.
•
To have AF frames displayed and the camera focus correctly, try
composing the shot with higher-contrast subject areas centered before you
press the shutter button halfway. Otherwise, try pressing the shutter button
halfway repeatedly.
Subjects in shots look too dark.
• Set the flash mode to [ h] ( =
101 ).
•
Adjust brightness by using exposure compensation (
=
86 ).
•
Adjust contrast by using i-Contrast (
=
90 , 130 ).
•
Use AE lock or spot metering (
=
87 , 88 ).
Subjects look too bright, highlights are washed-out.
• Set the flash mode to [ !] ( =
60 ).
•
Adjust brightness by using exposure compensation (
=
86 ).
•
Use AE lock or spot metering (
=
87 , 88 ).
•
Reduce the lighting on subjects.
Shots look too dark despite the flash firing ( =
50
).
• Shoot within flash range ( =
212 ).
•
Increase the ISO speed (
=
89 ).
Subjects in flash shots look too bright, highlights are
washed-out.
• Shoot within flash range ( =
212 ).
• Set the flash mode to [ !] ( =
60 ).