Canon EOS Rebel T5 18-55 IS II Kit - Manual (Page 7)

6
1
2
3
4
Introduction
Contents at
a Glance
Downloading
Images
Camera
Settings
Remote
Shooting
Reference
Preferences
Index
Starting up EU
When the camera’s power switch is set to <ON>, EU will start up, and
the camera and computer will be able to communicate.
1 Set the camera’s power switch to < ON >.
2 Double-click the [EOS Utility] icon on the Dock.
 Communication between the camera and the computer begins,
and the following screen appears.
 From the next time you connect your camera and the computer,
EU will start when you set your camera's power switch to <ON>.
 cannot communicate with EU if the camera’s
Mode Dial is set to < >. Set the Mode Dial to a mode other
than < >.
 EU starts up, the main window appears, and your camera and
computer can now communicate. Continue with “Batch
Downloading Images to Your Computer”.
REBELT1i 500D
EU Main window
 The main window displayed differs depending on the connected
camera
(p.95) .
 The camera’s LCD monitor turns on when EU starts up.
 For cameras other than
, you can operate the camera and
download images saved on the memory card inserted in the
camera to your computer. Refer to your camera’s Instruction
Manual for details.
1D Mk IV 6D 7D 70D
60D REBELT5i 700D REBELSL1 100D REBELT4i 650D
REBELT3i 600D REBELT2i 550D REBELT5 1200D REBELT3
1100D M2 M
When EU starts, a [ ] icon appears on the menu bar of the
desktop. You can click this icon and display the screen to apply the
setting below.
[Do not launch EOS Utility automatically when camera is
connected]
This setting is effective only when the camera and the computer
are connected via USB.
If you select [Quit] on this screen, EU will not start automatically
when you connect the camera and the computer again.
COP
Y