Canon EOS Rebel SL1 18-55mm IS STM Lens Kit - Manual (Page 126)

3 Auto Exposure BracketingN
126
Follow steps 1 and 2 to turn off the AEB range display.
The AEB setting will also be canceled automatically if the power
switch is set to <2>, flash recycling is completed, etc.
Using AEB with continuous shooting
If Drive/self-timer is set to <i> or <M> (p.108) and you press the
shutter button completely, the three bracketed shots will be taken
continuously in this sequence: standard exposure, decreased
exposure, and increased exposure. The shooting will then stop
automatically.
Using AEB with single shooting (u/B).
Press the shutter button three times to take the three bracketed
shots. The three bracketed shots will be exposed in the following
sequence: standard exposure, decreased exposure, and increased
exposure.
Using AEB with the self-timer or a remote controller (sold
separately)
With the self-timer or a remote control shooting (<Q> or <l>),
you can take three continuous shots after a 10-sec. or 2-sec. delay.
With <q> (p.110) set, the number of continuous shots will be three
times the number set.
Canceling AEB
Shooting Tips
AEB cannot be used with flash, [Multi Shot Noise Reduction], Creative
filters, or bulb exposures.
If [z2: Auto Lighting Optimizer] (p.130) is set to any setting other
than [Disable], the effect of AEB may be minimal.
COP
Y