Canon EOS Rebel SL1 18-55mm IS STM Lens Kit - Manual (Page 286)

w Printing
286
4
Set the printing effects (image
optimization).
Set them if necessary. If you do not
need to set any printing effects, go to
step 5.
What is displayed on the screen
differs depending on the printer.
Select the option, then press <0>.
Select the desired printing effect, then
press <0>.
If the <e> icon is displayed brightly
next to <z>, you can also adjust
the printing effect (p.288).
* When you change the printing effects, changes are reflected in the image
displayed on the upper left of the screen. Note that the printed image may
look slightly different from the displayed image, which is only an
approximation. This also applies to [Brightness] and [Adjust levels] on
page 288.
Printing Effect Description
EOn
The image will be printed using the printer’s standard colors.
The image’s Exif data is used to make automatic corrections.
EOff No automatic correction will be applied.
EVivid
The image will be printed with higher saturation to produce
more vivid blues and greens.
ENR Image noise is reduced before printing.
0 B/W Prints in black-and-white with true blacks.
0 Cool tone Prints in black-and-white with cool, bluish blacks.
0 Warm tone Prints in black-and-white with warm, yellowish blacks.
z Natural
Prints the image in the actual colors and contrast. No automatic
color adjustments are applied.
z Natural M
The printing characteristics are the same as the “Natural”
setting. However, this setting enables finer printing adjustments
than with “Natural”.
EDefault
The printing will differ depending on the printer. For details,
refer to the printer’s instruction manual.
COP
Y