Canon imagePROGRAF iPF825 - Manual (Page 470)

G
Scaling
Resizes the document image based on a specified scaling value. Enter a value in a range of 5–600.
H Borderless Printing
Borderless printing is available if roll paper is selected in the A Paper Source list.
Activate this setting for borderless printing to match the size and width of the paper.
• Borderless Printing on Paper of Equivalent Size →P.101
• Borderless Printing by Resizing Originals to Fit the Roll Width →P.108
• Borderless Printing at Actual Size →P.92
I Paper Size
Choose the size of the paper you will print on.
Click Display all selections for Paper Size to list available sizes.
For details on available paper sizes, see "Paper Sizes
→P.626 "
J Print Centered
Select this checkbox to print document images in the center of the paper.
• Printing Originals Centered on Rolls →P.156
• Printing Originals Centered on Sheets →P.162
K No Spaces at Top or Bottom
Select this checkbox to print the next image skipping blank areas above and below printable data in documents, which ena-
bles you to conserve the paper.
• Conserving Roll Paper by Printing Originals Without Top and Bottom Margins →P.175
L Rotate Page 90 degrees
Select this checkbox to rotate the document image by 90 degrees before printing.
• Conserving Roll Paper by Rotating Originals 90 Degrees →P.169
N Free Layout
Select this checkbox to start imagePROGRAF Free Layout before printing.
This allows you to print multiple documents next to each other.
Important
• This cannot be selected if Print Preview is enabled in the Main panel.
• Printing Multiple Originals Next to Each Other →P.135
Mac OS X Software > Printer Driver >
Page Setup Pane iPF825
5
454