Canon imagePROGRAF iPF825 - Manual (Page 922)

Cause Corrective Action
Highly transparent film is loa-
ded that cannot be used for au-
tomatic feed amount adjust-
ment. Press the Online button to clear the error, and then adjust the feed amount manually.
(See "Manual Band Adjustment (Manual Band Adj).")
→P.686
PHead needs cleaning.
Cause Corrective Action
The Printhead nozzles
are clogged. Press the Online button to resume printing.
Follow these steps to clean the Printhead.
1. Hold down the Stop button for a second or more to cancel printing.
2. Printhead cleaning options.
(See "Cleaning the Printhead.")
→P.815
If the message is still displayed after you execute Head Cleaning B once or twice, contact
your Canon dealer for assistance.
Wrong printhead.
Cause Corrective Action
An incompatible Printhead has been installed. Open the Top Cover and replace the Printhead with a new one.
(See "Replacing the Printhead.")
→P.816
Problem with Printhead
Cause Corrective Action
The Printhead nozzles are becoming clogged. If printing is faint, clean the Printhead.
(See "Cleaning the Printhead.")
→P.815
Printhead error
Cause Corrective Action
There is a problem with the Printhead. Open the Top Cover and replace the Printhead with a new one.
(See "Replacing the Printhead.")
→P.816
No printhead
Cause Corrective Action
No Printhead is installed. Install the Printhead.
(See "Replacing the Printhead.")
→P.816
Error Message > Messages regarding printheads >
PHead needs cleaning. iPF825
13
906