Canon imagePROGRAF iPF9400 - Manual (Page 833)

5
Make sure the Ink Lamp is lit in red.
Note
• If the Ink Lamp is not lit in red, reload the tank.
6
Close the Ink Tank Cover.
Important
• After Ink Tank replacement, always close the Ink Tank Cover. If the Ink Tank Cover cannot close, some Ink Tank
Lock Lever may not be closed completely. Make sure all ink tank lock levers are fully closed.
Load the Ink Tank (700 ml)
1
Before opening the pouch, hold the new Ink Tank with both
hands and tilt it to the left and right as shown, shaking gen-
tly it seven or eight times.
Caution
• 700 ml ink tanks are heavy, so use your whole arm to agitate it instead of just your wrist. If you agitate it using just
your wrist, you may injure your wrist.
iPF9400 Replacing Ink Tanks
User's Guide
Maintenance and Consumables
Ink Tanks
833