Cleaning the printhead, See "cleaning the printhead."), P.839 – Canon imagePROGRAF iPF9400 User Manual

Page 839

Advertising
background image

3

Press the OK button.
The Set./Adj. Menu is displayed.

4

Press or to select Test Print, and then press the OK button.

5

Press or to select Nozzle Check, and then press the OK button.
The printer now prints a test pattern for checking the nozzles.

6

Check the printing results.
If the horizontal lines are not faint or incomplete, the nozzles are
clear.

If some sections of the horizontal lines are faint or incomplete, the
nozzles for those colors are clogged.

If horizontal lines are faint or incomplete, follow the steps below
and check again for nozzle clogging.

1.

Clean the Printhead. (See "Cleaning the Printhead.")

→P.839

2.

Print a test pattern to check the nozzles.

Important

If you repeat these steps several times but the horizontal lines are still faint or incomplete, contact your Canon
dealer.

Cleaning the Printhead

Cleaning the Printhead

If printing is faint, cleaning the Printhead may improve results.
Choose one of two Printhead cleaning modes ( Head Cleaning A or Head Cleaning B), depending on the problem to
resolve.

Head Cleaning A
Use this mode if printing is faint or contains foreign substances. This method of cleaning consumes the least
amount of ink.
It takes about four minutes to complete.

Head Cleaning B
Use this mode if no ink is ejected at all, or if Head Cleaning A does not solve the problem.
It takes about five minutes to complete.

Important

Do not remove the Maintenance Cartridge or ink tanks during either Head Cleaning A or Head Cleaning B.
Ink may leak or an error may occur.

If printing does not improve even if you execute Head Cleaning B, try repeating Head Cleaning B once or twice. If this still
does not improve printing, the Printhead may have reached the end of its useful life. Contact your Canon dealer for assis-
tance.

Note

Nozzles are periodically checked to ensure they are clear. Configure the settings on the Control Panel menu in Nozzle Check.
(See "Menu Settings.")

→P.667

iPF9400

Cleaning the Printhead

User's Guide

Maintenance and Consumables

Printheads

839

Advertising