Canon VB-C60 - Manual (Page 215)

6-3
O
per
a
tio
n an
d M
a
n
age
me
nt
Health Check for Storage Server
VK Events (Timeline for VK Viewer)
If any of the events listed in the table below occurs, you may have to take the specified counteraction.
The text within < > in each message depends on the situation.
For the items marked with (*), see "Important: Disk Space Management" (  P. 3-17).
Event type Message Description
Counteraction
example
Indicates the free
space on the disk
warning (on) / ok (off)
Disk space on drive <drive
Name> <situation>
This event occurs when the
disk free space has run under
the specified value or the used
disk space has exceeded the
specified valued.
In this case, data may be
deleted before the designated
storage time elapses. Disk
capacity indication is only
effective when it is on.
Review the
recording and
Camera Server
settings
(
 P. 3-10, P. 4-24)
Starts and stops
deletion due to space
shortage. (*)
starting (on) / stopping (off)
<situation> deleting files on
drive <drive name> due to low
disk space
This event occurs when the
disk free space has run under
the threshold value or the used
disk space has exceeded the
threshold valued.
Pauses and resumes
recording due to
space shortage. (*)
starting (on) / stopping (off)
<situation> suspension of
recording on drive <drive
name> due to low disk space
This event occurs when the
disk free space has run under
the threshold value or the used
disk space has exceeded the
threshold valued.
Connection error to the
Camera Server
error (on) / ok (off)
Connection to host <Camera
Server Address>: <Port>
<Situation>
This event occurs when an
error has occurred while
connecting to the Camera
Server. However, it does not
necessarily occur for every
connection failure. When this
event occurs, the recording
engine tries for reconnection
and a COMM error occurs if
the retry fails.
Review the network
connection
(
 P. 4-19).
Recording frame rate
change
Effective recording rate
(<recording rate before
change>
 <recording rate
after change> %)
Example:
Ex. "Recording rate (100.0 >
90.0 %)"
Note: This is not an On/Off
event.
This event indicates that the
recording frame rate has been
reduced due to increased
server load.
Review the
recording settings
or consider adding
the Storage Server
(
 P. 4-14).