Canon VB-C60 - Manual (Page 69)

3-17
Sto
rage
Ser
v
er C
o
n
fig
ur
ati
on
R
e
fe
renc
e
Important: Disk Space Management
Disk Space Management Level
The Storage Server monitors the remaining disk space to check the current disk space management level and
takes a measure according to the current level.
1. [Low disk space warning level]
2. Threshold Level
3. Limit Level
Administrator can set the [Low disk space warning level] 1. using the Low disk space warning level field in the
[Settings] tab.
The Storage Server calculates the values for Threshold Level 2. and Limit Level 3. based on various conditions
and settings.
Handling at Each Level
The Storage Server performs the following when the disk space reaches each level.
In case of [Low disk space warning level]
The Storage Server generates an event when the disk space available for recording (i.e., free space from the
Maximum disk space used value) has fallen down to a certain level.
If the [Maximum disk space used] field is not set, the entire drive capacity of the drive specified in the [Drive]
field is considered to be the maximum disk space used.
Note
The event notification e-mail is sent when the priority specified for the [Low disk space warning level] option
in the [Events] tab of the [Storage Server Configuration] dialog is equal to or higher than the priority
specified in the [Event Notification] tab. See P. 3-21 and P. 3-23 for how to set the [Events] and [Event
Notification] tabs.
Tip
Event notification allows early control by an administrator to avoid problems due to running out of disk
space (for example, removing unnecessary recording schedules).
[Maximum disk
space used]
Warning Level
Event Notification
Disk space on
drive <Drive> :
warning