Canon PowerShot SX280 HS - Manual (Page 137)

1
2
3
4
5
6
7
8
9
10
11
Cover
Preliminary Notes
and Legal Information
Contents: Basic
Operations
Advanced Guide
Camera Basics
Using GPS
Function
Auto Mode/
Hybrid Auto Mode
Other Shooting
Modes
Tv, Av, and M
Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
Basic Guide
P Mode
137
Connecting to Access Points in the List
1 View the listed access points.
z z View the listed networks (access points)
as described in steps 1 – 3 of “Adding a
Computer” ( = 135 ).
2 Choose an access point.
z z Press the < o><p> buttons or turn the
< 5> dial to choose a network (access
point), and then press the < m> button.
3 Enter the access point’s
encryption key.
z z Press the < m> button to access the
keyboard, and then enter the encryption
key ( = 134 ).
z z Press the < o><p> buttons or turn the
< 5> dial to choose [Next], and then
press the < m> button.
4 Choose [Auto].
z z Press the < o><p> buttons or turn the
< 5> dial to choose [Auto], and then
press the < m> button.
X X A list of other devices connected to the
access point will appear in the [Select a
Device] screen.
• You can connect to computers that you have already connected to by choosing
them on the [Select a Device] screen in step 3.
• If you chose [PIN Method] in step 5, a PIN code will be displayed on the
screen. Be sure to set this code in the access point. Choose a device in the
[Select a Device] screen. For further details, refer to the user guide included
with your access point.
• To add multiple computers, repeat the above procedures starting from step 1.
• To disconnect from the camera, turn off the camera.
• When accessing the Wi-Fi menu from the second time by pressing the < o>
button, the most recently connected device will be displayed first, allowing
you to easily select it for connection. To add a new device, display the device
selection screen by pressing the < q><r> buttons, and then configure the
setting.
COP
Y