On-screen messages, Cop y – Canon PowerShot SX280 HS User Manual
Page 176
1
2
3
4
5
6
7
8
9
10
11
Cover
Preliminary Notes
and Legal Information
Contents: Basic
Operations
Advanced Guide
Camera Basics
Using GPS
Function
Auto Mode/
Hybrid Auto Mode
Other Shooting
Modes
Tv, Av, and M
Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
Basic Guide
P Mode
176
On-Screen Messages
If an error message is displayed, respond as follows.
No memory card
•
The memory card may be inserted facing the wrong way. Reinsert the memory card
).
Memory card locked
•
The write-protect tab of the memory card is set to the locked position. Switch the
write-protect tab to the unlocked position (
).
Cannot record!
•
Shooting was attempted without a memory card in the camera. To shoot, insert a
memory card facing the correct way (
Memory card error (
•
If the same error message is displayed even after you have formatted a supported
) and have inserted it facing the correct way (
a Canon Customer Support Help Desk.
Insufficient space on card
•
There is not enough free space on the memory card to shoot (
)
). Either erase unneeded images (
) or insert a
memory card with enough free space (
Charge the battery (
No Image.
•
The memory card does not contain any images that can be displayed.
Unidentified Image/Incompatible JPEG/Image too large./Cannot play
back MOV
•
Unsupported or corrupt images cannot be displayed.
•
It may not be possible to display images that were edited or renamed on a computer,
or images shot with another camera.
Cannot resize images for sending.
•
Images cannot be resized to be bigger than the resolution setting of their original size.
•
Movies cannot be resized.
Images take a long time to send./The Wi-Fi connection is disrupted.
•
Multiple images may take a long time to send. Try resizing the image to [
] or [
]
to reduce sending time (
).
•
Movies may take a long time to send.
•
Do not use the camera near sources of Wi-Fi signal interference, such as microwave
ovens, Bluetooth devices, or other equipment operating on the 2.4 GHz band. Note
that images may take a long time to send even when [
] is displayed.
•
Bring the camera closer to the other device you are trying to connect to (such as the
access point), and make sure there are no objects between the devices.
•
When sending images to a computer from a memory card with a large amount
of images (approximately 1,000), the connection may be disrupted. Import any
necessary images to a computer, and then reduce the number of images on the
memory card by erasing unnecessary images.
Want to erase Wi-Fi connection information before disposing of the
camera or giving it to someone else.
•
COP